Proshop
Mistral Centerboard Gasket
Fits Equipe, Equipe II,Superlight II
$45.95
This gasket kit is designed to fit the Mistral Equipe’s and SuperlightII models 1994-1998
DIMENSIONS:
35 3/8″ by 2 3/4″ // 89.8 cm by 7 cm
It has the same durometer as the original gasket.
NOTE: IF you need the Glue as well, please order the GASKET KIT
Once you purchase the gasket kit, you may join Tinho’s forum – get a username and then Tinho will open up the gasket repair area for your viewing. It gives complete instructions and tips on installation.
Please email Tinho and let him know when you want to join the forum, so he can allow new subscribers. If you are already a member of Tinho’s forum, just email him your username.
Note: For early equipe models 1989-1993 you can use this gasket after some modification. please see this article
We also sell a special super glue, $8.00 per bottle. Check item 1/2oz. Superglue – Enough for 4 gaskets….
Super glue works great as long as there is no air between the parts.
Instructions: Carefully remove the old gasket using a 3/4 sharp chisel. Be careful and keep your hands BEHIND the chisel blade!! Repair and smooth any imperfections on the board. Clean the gasket surface and the board with MEK or Acetone, and don’t touch the cleaned surfaces with bare fingers. Sand the dull surface of the gasket with 400 or 300 sandpaper, until the surface is totally luster free. Sand only the 1/2 contact area that will be glued to the board.
Place the gasket over the slot, and align it properly. Lift the front and glue the front area first…..
For those purchasing the gasket, I have the free, full instructions with pictures and step by step, exclusive for our customers. Please register on our forum, and email us the registered name. We will then open the instruction area for you.
